Reference v4.1.0 Instruction Manual

330 Network OS Command Reference
53-1003115-01
interface (range specification)
2
interface (range specification)
Allows a range of values to be entered for some interface configurations.
Synopsis interface {fibrechannel rbridge-id/slot/port | fcoe vn-number/rbridge-id/front-port-number |
fortygigabitethernet rbridge-id/slot/port | gigabitethernet rbridge-id/slot/port |
port-channel number | tengigabitethernet rbridge-id/slot/port | vlan vlan_id | loopback
port_number | ve vlan_id}
no interface {port-channel number | vlan vlan_id | fcoe vn-number/rbridge-id/front-port-number}
Operands fibrechannel rbridge-id/slot/port
Specifies a valid Fibre Channel port interface (Brocade VDX 6730 switches
only in Brocade VCS Fabric mode).
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
fcoe vn-number/rbridge-id/front-port-number
Specifies a valid FCoE port interface.
vn-number Specifies the VN number for FCoE.
rbridge-id Specifies the routing bridge ID. This is not valid in standalone mode.
front-port-number Specifies the front port number.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface (Brocade VDX 6710,
Brocade VDX 8770-4, and Brocade VDX 8770-8 switches only).
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
port-channel number Specifies the port-channel number. The number of available channels
range from 1 through 63 for standalone mode, and from 1 through 6144
for Brocade VCS Fabric mode. However, the channel can be assigned any
number from 1 through 6144.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.