Reference v4.1.0 Instruction Manual

388 Network OS Command Reference
53-1003115-01
ip pim dr-priority
2
ip pim dr-priority
Configures the designated router (DR) priority of a PIM router.
Synopsis ip pim dr-priority priority-value
no ip pim dr-priority
Operands priority-value The DR priority value. Valid values range from 0 through 65535.
Defaults DR priority value is 1.
Command Modes Interface configuration mode
Router interface configuration mode
Description Use this command to set the DR priority value of a Protocol Independent Multicast-enabled
interface.
Usage Guidelines Enter no ip pim dr-priority to disable this feature.
Examples Setting the priority to 100.
switch(conf-if-ext-0/15)# ip pim dr-priority 100
See Also router pim