Reference v4.1.0 Instruction Manual

390 Network OS Command Reference
53-1003115-01
ip policy route-map
2
ip policy route-map
Enables policy-based routing (PBR) on any Layer 3 interface after ACLs and route map entries are
configured.
Synopsis ip policy route-map map-tag
no ip policy route-map map-tag
Operands map-tag The name of the route-map when it was created.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to enable policy-based routing (PBR) on any Layer 3 interface after ACLs and
route map entries are configured.
Usage Guidelines Enter no ip policy route-map to disable this feature.
Examples None
See Also show route-map, show route-map interface