Reference v4.1.0 Instruction Manual

406 Network OS Command Reference
53-1003115-01
iscsi-priority
2
iscsi-priority
Sets the iSCSI priority bitmap.
Synopsis iscsi-priority value
no iscsi-priority
Operands value The priority bitmap value. Valid values range from 0 through 7.
Defaults Priority bitmap value is 4.
Command Modes Protocol LLDP configuration mode
Description Use this command to set the iSCSI priority bitmap for use in the DCBX iSCSI TLV.
Usage Guidelines Enter no iscsi-priority to return to the default value.
Examples None
See Also None