Reference v4.1.0 Instruction Manual

Network OS Command Reference 411

53-1003115-01

lacp default-up

Activates an LACP link in the absence of PDUs.

Synopsis lacp default-up

no lacp default-up

Operands None

Defaults None

Command Modes Interface configuration mode

Description Use this command to force the port to activate an LACP link if there are no PDUs available on the

interface port. This command is supported on all physical interfaces.

Usage Guidelines This command is visible only if the interface is a dynamic and standard member of a port-channel.

This command is not supported on Static LAGs.

This command is not supported on static or dynamic Brocade Trunks.

This command is not supported on any other types of interfaces, such as port-channel or VLAN.

Enter no lacp default-up to disable this feature.

Examples

switch# (conf-if-te-1/0/9)# lacp default-up