Reference v4.1.0 Instruction Manual

Network OS Command Reference 425

53-1003115-01

lldp iscsi-priority

Sets the priority that will be advertised in the DCBX iSCSI TLV.

Synopsis lldp iscsi-priority value

no lldp iscsi-priority

Operands value Specifies the priority value. Valid values range from 0 through 7.

Defaults Priority value is 4.

Command Modes Interface subtype configuration mode

Description Use this command to specify the priority that will be advertised in the DCBX iSCSI TLV. The iSCSI

priority setting is used to configure the priority that will be advertised in the DCBX iSCSI TLV for a

specific interface.

Usage Guidelines Enter no lldp iscsi-priority to return to the default setting.

Examples To set the iSCSI priority value to 5 on a specific 10-gigabit Ethernet interface:

switch(config)# interface tengigabitethernet 178/0/9

switch(conf-if-te-178/0/9)# lldp iscsi-priority 5

See Also interface, lldp dcbx-version, lldp disable, lldp profile