Reference v4.1.0 Instruction Manual

Network OS Command Reference 431

53-1003115-01

logging syslog-facility local

Configures the syslog facility.

Synopsis logging syslog-facility local log_level

Operands log_level Specifies the syslog facility level. Valid log levels include the following:

LOG_LOCAL0, LOG_LOCAL1, LOG_LOCAL2, LOG_LOCAL3, LOG_LOCAL4,

LOG_LOCAL5, LOG_LOCAL6, LOG_LOCAL7

Defaults Syslog level is LOG_LOCAL7.

Command Modes Global configuration mode

Description Use this command to configure the log level for all error log entries to forward to one or more

specified servers. You can configure up to four servers.

Usage Guidelines When used without a log level parameter, use this command to display the current value.

This command is supported only on the local switch.

This command is not supported on the standby management module.

Examples To configure the syslog facility level:

switch(config)# logging syslog-facility local LOG_LOCAL5

See Also logging syslog-server, show running-config logging syslog-server