Reference v4.1.0 Instruction Manual

434 Network OS Command Reference

53-1003115-01

logical-chassis principal-switchover

Triggers a fabric reformation and elects a principal node based on the principal priority value.

Synopsis logical-chassis principal-switchover

Operands None

Defaults None

Command Modes Privileged EXEC mode

Description Issue this command after you have used the logical-chassis principal-priority priority-value

command so that the priority you set takes effect and a new principal node is selected on the

cluster.

Usage Guidelines None

Examples

switch# configure

switch(config)# rbridge-id 5

switch(config-rbridge-id-5)# logical-chassis principal-priority 1

switch(config-rbridge-id-5)# end

switch# logical-chassis principal-switchover

See Also logical-chassis principal-priority