Reference v4.1.0 Instruction Manual

476 Network OS Command Reference

53-1003115-01

message-interval

Configures the Protocol Independent Multicast (PIM) Join/Prune message interval.

Synopsis message-interval num

no message-interval

Operands num The interval value in seconds. Valid values range from 10

through 65535 seconds.

Defaults 60 seconds

Command Modes PIM router configuration mode

Description Use this command to specify the interval at which the periodic PIM Join/Prune messages must be

sent out.

Usage Guidelines Enter no message-interval to disable this feature.

Examples Setting the interval to one hour.

switch(conf-pim-router)# message-interval 3600