Reference v4.1.0 Instruction Manual

Network OS Command Reference 479

53-1003115-01

mode

Sets the LLDP mode on the switch.

Synopsis mode {tx | rx}

Operands tx Specifies to enable only the transmit mode.

rx Specifies to enable only the receive mode.

Defaults Both transmit and receive modes are enabled.

Command Modes Protocol LLDP configuration mode

Description Use this command to set the LLDP mode on the switch.

Usage Guidelines None

Examples To enable only the transmit mode:

switch(conf-lldp)# mode tx

To enable only the receive mode:

switch(conf-lldp)# mode rx