Reference v4.1.0 Instruction Manual

492 Network OS Command Reference

53-1003115-01

neighbor advertisement-interval (BGP)

Enables changes to interval over which a specified neighbor or peer-group holds route updates

before forwarding them.

Synopsis neighbor {ip-address | peer-group-name} advertisement-interval seconds

no neighbor

Operands ip-address IPv4 address of the neighbor

peer-group-name Peer group name configured by the neighbor peer-group-name command.

seconds Range is from 0 through 3600.

Defaults The default is 0.

Command Modes BGP configuration mode

Description Use this command to configure the interval, in seconds, over which a specified neighbor or peer

group holds all route updates before forwarding them. When the timer expires, the routes are sent

as a batch.

Usage Guidelines None

Use the no form of this command to reset the interval to the default.

Examples

switch(config)# rbridge-id 10

switch(config-rbridge-id-10)# router bgp

switch(config-bgp-router)# neighbor 10.11.12.13 advertisement-interval 60