Reference v4.1.0 Instruction Manual

Network OS Command Reference 503

53-1003115-01

neighbor next-hop-self (BGP)

Causes the device to list itself as the next hop in updates that are sent to the specified neighbor.

Synopsis neighbor {ip-address | peer-group-name} next-hop-self [always]

no neighbor {ip-address | peer-group-name} next-hop-self [always]

Operands ip-address IPv4 address of the neighbor

peer-group-name Peer group name configured by the neighbor peer-group-name command.

always Enables this feature for route reflector (RR) routes.

Defaults None

Command Modes BGP configuration mode

Description Use this command to cause the device to list itself as the next hop in updates that are sent to the

specified neighbor.

Usage Guidelines Use the no form of this command to remove this configuration at the global level.

Examples

switch(config)# rbridge-id 10

switch(config-rbridge-id-10)# router bgp

switch(config-bgp-router)# neighbor 10.11.12.13 next-hop-self