Reference v4.1.0 Instruction Manual

Network OS Command Reference 509

53-1003115-01

neighbor route-map (BGP)

Filters the outgoing and incoming route updates to or from a particular BGP neighbor according to

a set of attributes.

Synopsis neighbor {ip-address | peer-group-name} route-map string {in | out}

no neighbor {ip-address | peer-group-name} route-map string {in | out}

Operands ip-address IPv4 address of the neighbor

peer-group-name Peer group name configured by the neighbor peer-group-name command.

string Name of the route map.

in Applies the filter on incoming routes.

out Applies the filter on outgoing routes.

Defaults None

Command Modes BGP address-family IPv4 unicast configuration mode

Description Use this command to filter the outgoing and incoming routes to or from a particular BGP neighbor

according to a set of attributes defined in a route map.

Usage Guidelines Use the no form of the command to restore the defaults.

Examples

switch(config)# rbridge-id 10

switch(config-rbridge-id-10)# router bgp

switch(config-bgp-router)# address-family ipv4 unicast

switch(config-bgp-ipv4u)# neighbor 10.11.12.13 route-map myroutemap out