Reference v4.1.0 Instruction Manual

Network OS Command Reference 511

53-1003115-01

neighbor send-community (BGP)

Enables sending the community attribute in updates to the specified BGP neighbor.

Synopsis neighbor {ip-address | peer-group-name} send-community {both | extended | standard}

no neighbor {ip-address | peer-group-name} send-community {both | extended | standard}

Operands ip-address IPv4 address of the neighbor

peer-group-name Peer group name configured by the neighbor peer-group-name command.

both Sends both standard and extended attributes.

extended Sends extended attributes.

standard Sends standard attributes.

Defaults The device does not send community attributes.

Command Modes BGP address-family IPv4 unicast configuration mode

Description Use this command to send the community attribute in updates to the specified BGP neighbor.

Usage Guidelines Use the no form of the command to restore the defaults.

Examples switch(config)# rbridge-id 10

switch(config-rbridge-id-10)# router bgp

switch(config-bgp-router)# address-family ipv4 unicast

switch(config-bgp-ipv4u)# neighbor 10.11.12.13 send-community standard