Reference v4.1.0 Instruction Manual

518 Network OS Command Reference

53-1003115-01

neighbor weight (BGP)

Specifies a weight that the device will add to routes that are received from the specified BGP

neighbor.

Synopsis neighbor {ip-address | peer-group-name} weight num

no neighbor {ip-address | peer-group-name} weight num

Operands ip-address IPv4 address of the neighbor.

peer-group-name Name of the peer group.

num Value from 1 through 65535.

Defaults The default for num is 0.

Command Modes BGP address-family IPv4 unicast configuration mode

Description Use this command to specify a weight that the device will add to routes that are received from the

specified BGP neighbor. BGP4 prefers larger weights over smaller weights.

Usage Guidelines Use the no form of the command to restore the defaults.

Examples

switch(config)# rbridge-id 10

switch(config-rbridge-id-10)# router bgp

switch(config-bgp-router)# address-family ipv4 unicast

switch(config-bgp-ipv4u)# neighbor 10.11.12.13 weight 100