Reference v4.1.0 Instruction Manual

520 Network OS Command Reference

53-1003115-01

next-hop-enable-default (BGP)

Configures the device to use the default route as the next hop.

Synopsis next-hop-enable-default

no next-hop-enable-default

Operands None

Defaults None

Command Modes BGP address-family IPv4 unicast configuration mode

Description Use this command to configure the device to use the default route as the next hop.

Usage Guidelines Use the no form of this command to restore the default.

Examples

switch(config)# rbridge-id 10

switch(config-rbridge-id-10)# router bgp

switch(config-bgp-router)# address-family ipv4 unicast

switch(config-bgp-ipv4u)# next-hop-enable-default