Reference v4.1.0 Instruction Manual

544 Network OS Command Reference

53-1003115-01

port-profile (global configuration mode)

Creates a new Automatic Migration of Port Profiles (AMPP) port-profile in the fabric.

Synopsis port-profile profile-name [activate | qos-profile | security-profile | vlan-profile |

static mac-address]

no port-profile profile-name

Operands profile-name A fabric-wide unique name of a port-profile.

activate Activates the specified profile

qos-profile Enters directly into edit mode for the QoS sub-profile.

security-profile Enters directly into edit mode for the security sub-profile.

vlan-profile Enters directly into edit mode for the VLAN sub-profile.

static mac-address Statically associates the profile VM MAC address.

Defaults None

Command Modes Global configuration mode

Description Use this command to create a new AMPP port-profile in the fabric with the specified name and

shift to the port-profile mode. If the port-profile name already exists, then the switch enters

port-profile mode and edits the existing profile.

A system-generated fabric-wide unique port-profile ID is assigned by default.

You can also directly access the submodes for the profile, and assign the profile statically to a MAC

address.

Security profiles are applied to the ACLs based on the profile or PolicyID. Therefore, multiple

security profiles can be applied to the same profiled port.

Usage Guidelines Enter no port-profile profile-name to de-activate the port-profile.

Examples None