Reference v4.1.0 Instruction Manual

Network OS Command Reference 559
53-1003115-01
priority-tag
2
priority-tag
Toggles priority-tagging support.
Synopsis priority-tag
no priority-tag
Operands None
Defaults The priority-tag is disabled for all supported interfaces.
Command Modes Interface subtype configuration mode
Description Use this command to toggle the priority-tagging support on a specific interface. This command is
the only method for toggling priority-tagging.
Usage Guidelines Enter no priority-tag to disable priority-tagging support.
Example To enable priority-tagging support on a specific 10-gigabit Ethernet interface:
switch(config)# interface tengigabitethernet 178/0/9
switch(conf-if-te-178/0/9)# priority-tag
See Also interface, cee-map (FCoE)