Reference v4.1.0 Instruction Manual

Network OS Command Reference 565

53-1003115-01

protocol edge-loop-detection

Sets the edge-loop detection (ELD) configuration mode.

Synopsis protocol edge-loop-detection

Operands None

Defaults ELD configuration mode is not set.

Command Modes Global configuration mode

Description Use this command to enter the ELD configuration mode to make changes to the ELD configuration.

Usage Guidelines This functionality detects Layer 2 loops only.

Examples To enter the ELD configuration mode:

switch(config)# protocol edge-loop-detection

switch(config-eld)#

See Also hello-interval, pdu-rx-limit, shutdown-time