Reference v4.1.0 Instruction Manual

Network OS Command Reference 577

53-1003115-01

qos dscp-traffic-class

Applies a defined DSCP-to-Traffic-Class map to an interface,

Synopsis qos dscp-traffic-class name

no qos dscp-traffic-class

Operands name Name of DSCP-to-Traffic-Class map

Defaults DSCP-to-Traffic-Class map is not enabled on the interface.

Command Modes Interface subtype configuration mode

Description Use this command to apply a QoS DSCP-to-Traffic-Class map defined by the qos map

dscp-traffic-class name command to a specific interface.

Usage Guidelines Enter no qos dscp-traffic-class while in the interface mode to remove the DSCP-to-Traffic-Class

map from the interface.

Examples To apply a configured DSCP-Traffic-Class map named test to a specific interface, enter

qos dscp-traffic-class name while in the interface configuration mode:

switch(config)# interface tengigabitethernet 16/2/2

switch(conf-if-te-16/2/2)# qos dscp-traffic-class test

To remove a configured DSCP-Traffic-Class map named test from a specific interface, enter no qos

dscp-traffic-class while in the interface configuration mode:

switch(config)# interface tengigabitethernet 16/2/2

switch(conf-if-te-16/2/2)# no qos dscp-traffic-class

See Also interface, qos map dscp-traffic-class, show qos maps dscp-traffic-class