Reference v4.1.0 Instruction Manual

Network OS Command Reference 595
53-1003115-01
qos rcv-queue cos-threshold
2
Usage Guidelines The tail drop thresholds are not allowed to exceed 100%, but can be below 100%. For example,
if the tail drop thresholds entered are less than 100%, then the buffer allocation happens as per
what has been configured.
Enter no qos rcv-queue cos-threshold to remove the configured tail drop thresholds.
Examples
switch(config)# interface tengigabitethernet 178/0/9
switch(conf-if-te-178/0/9)# qos rcv-queue cos-threshold 5 5 5 5 50 20 2 8
switch(conf-if-te-178/0/9)# do show qos in te 178/0/9
Interface Ten Gigabit Ethernet 178/0/9
CoS-to-Traffic Class map 'default‘
In-CoS: 0 1 2 3 4 5 6 7
-----------------------------------------------------
Out-CoS/TrafficClass: 0/1 1/0 2/2 3/3 4/4 5/5 6/6 7/7
Per-Traffic Class Tail Drop Threshold (bytes)
TC:01234567
------------------------------------------------------------------
Threshold: 10180 10180 10180 10180 101808 40723 4072 16289
See Also interface, qos rcv-queue multicast threshold