Reference v4.1.0 Instruction Manual

606 Network OS Command Reference
53-1003115-01
rate-limit-delay set netconf
2
rate-limit-delay set netconf
Limits the rate at which BNA or NETCONF Remote Procedure Call (RPC) requests can be processed
on the switch.
Synopsisrate-limit-delay set netconf delay
Operands delay The number of milliseconds the system waits between processing RPCs.
Defaults The default is 0.
Command Modes Privileged EXEC mode
Description Use this command to limit the rate at which RPCs can be processed on the switch by specifying the
minimum delay between processing successive RPCs. The default of 0 means that the RPC
processing rate is unlimited.
Usage Guidelines Use this command to prevent excessive numbers of RPCs from adversely affecting switch
performance.
Examples This example limits the processing of RPCs to a maximum of one every 50 milliseconds.
switch# debug internal rate-limit-delay set netconf 50
See Also rate-limit-delay get netconf