Reference v4.1.0 Instruction Manual

618 Network OS Command Reference
53-1003115-01
rename (Access Gateway mode)
2
rename (Access Gateway mode)
Provides a name for a port group or renames a port group in Access Gateway mode.
Synopsis rename pg_name
Operands pg_name Port group name
Defaults None
Command Modes Port Grouping configuration mode
Description Renames a specific port group identifier.
Usage Guidelines You must be in Port Grouping configuration mode for the specific port group to use this command.
The pg_name cannot exceed 64 characters,.
Examples Renaming port group pg-1 to pg-array24.
sw0(config-rbridge-id-3-ag-pg-1)# rename pg-array24
See Also show ag pg, pg