Reference v4.1.0 Instruction Manual

626 Network OS Command Reference

53-1003115-01

rmon alarm

Sets the RMON alarm conditions.

Synopsis rmon alarm index snmp_oid interval seconds [absolute | delta] rising-threshold value

event number [falling-threshold value event number [owner name]

no rmon alarm

Operands index Specifies the RMON alarm index. Valid values range from 1 through 65535.

snmp_oid Specifies the MIB object to monitor. The variable must be in the SNMP OID

format, for example, 1.3.6.1.2.1.16.1.1.1.5.65535. The object type must

be a counter32.

interval seconds Specifies the RMON alarm sample interval in seconds. Valid values range

from 1 through 2147483648.

absolute Sets the sample type as absolute.

delta Sets the sample type as delta.

rising-threshold value

Specifies the RMON alarm rising threshold. Valid values range from 0

through 4294967295.

event number Specifies the event for the rising alarm. Valid values range from 1

through 65535.

falling-threshold value

Specifies the RMON alarm falling threshold. Valid values range from 0

through 4294967295.

event number Specifies the event for the rising alarm. Valid values range from 1

through 65535.

owner name Specifies the identity of the owner. The maximum number of characters

is 32.

Defaults No alarms are configured.

Command Modes Global configuration mode

Description Use this command to set alarm conditions.

Usage Guidelines Enter no rmon alarm to disable the alarm conditions.

Examples To set RMON alarm conditions:

switch(config)# rmon alarm 100 1.3.6.1.2.1.16.1.1.1.5.65535 interval 5 absolute

rising-threshold 10000 event 100 falling-threshold 1000 event 101 owner admin