Reference v4.1.0 Instruction Manual

Network OS Command Reference 627

53-1003115-01

rmon collection history

Collects Ethernet group statistics for later retrieval.

Synopsis rmon collection history number [buckets bucket_number | interval seconds | owner name]

no romn collection history number

Operands number Specifies the RMON collection control index value. Valid values range

from 1 through 65535.

buckets bucket_number

Specifies the maximum number of buckets for the RMON collection history.

Valid values range from 1 through 65535.

interval seconds Specifies the alarm sample interval in seconds. Valid values range from 1

through 3600. The default value is 1800.

owner name Specifies the identity of the owner. The maximum number of characters

is 15.

Defaults RMON history collection is not enabled.

Command Modes Interface subtype configuration mode

Description Use this command to collect periodic statistical samples of Ethernet group statistics on a specific

interface for later retrieval.

Usage Guidelines Enter no rmon collection history number to disable the history of statistics collection.

Examples To collect RMON statistics, with an RMON collection control index value of 5 for the owner named

admin, on a specific 10-gigabit Ethernet interface:

switch(config)# interface tengigabitethernet 170/0/1

switch(conf-if-te-170/0/1)# rmon collection history 5 owner admin