Reference v4.1.0 Instruction Manual

Network OS Command Reference 637

53-1003115-01

rp-address

Adds or removes a static rendezvous point.

Synopsis rp-address A.B.C.D

no rp-address

Operands A.B.C.D The IP address that should be designated as the rendezvous point router.

Defaults No interface is configured as the rendezvous point candidate.

Command Modes PIM router configuration mode

Description Use this command to add or remove a static rendezvous point address for a PIM domain. Since

prefix-lists are not supported, the address is assumed to be the rendezvous point for 224.0.0.0/4

address range.

Usage Guidelines Enter no rp-address to disable this feature.

Examples Setting the IP address to 12.12.12.12.

switch(conf-pim-router)# rp-address 12.12.12.12