Reference v4.1.0 Instruction Manual

660 Network OS Command Reference

53-1003115-01

set cos traffic-class

Specifies the User-Priority field value in VLAN header and traffic-class queuing value when a

packet matches a flow.

Synopsis set cos {0..7} traffic-class {0..7}

no set cos {0..7} traffic-class {0..7}

Operands 0..7} Modifies the Class of Service (CoS) value in the VLAN header of classified

traffic, or assigns a queue to the classified traffic. The range of valid values

is from 0 through 7.

Defaults None

Command Modes Route-map configuration mode

Description Use this command to specify the User-Priority field value in VLAN header and traffic-class value

when a packet matches a flow.

Usage Guidelines None

Examples

switch(config)# policy-map p1

switch(config-policymap)# class c1

switch(config-policyclass)# set cos 4 traffic-class 3