Reference v4.1.0 Instruction Manual

Network OS Command Reference 667
53-1003115-01
set metric
2
set metric
Configures the route metric set clause in a route-map instance.
Synopsis set metric [add | assign | sub] value
no set metric [add | assign | sub] value
Operands add Adds the value to the current route metric.
assign Replaces the current route metric with this value.
sub Subtracts the value from the current route metric.
none Removes the current route metric.
value Range is from 0 through 4294967295.
Defaults None
Command Modes Route-map configuration mode
Description Use this command to modify or remove the current route metric in a route-map instance.
Usage Guidelines None
Examples None
See Also ip prefix-list, match interface, matchipaddress, matchipnext-hop, matchmetric,
match route-type, match tag, route-map, set distance, set ip next-hop, set tag