Reference v4.1.0 Instruction Manual

Network OS Command Reference 671
53-1003115-01
set route-type
2
set route-type
Sets a route type in a route-map instance.
Synopsis set route-type [internal | type-1 | type-2]
no set route-type
Operands internal Internal route type
type-1 OSPF external route type 1
type-2 OSPF external route type 2
Defaults None
Command Modes Route-map configuration mode
Description Use this command to set a route type in a route-map instance.
Usage Guidelines None
Examples None
See Also route-map