Reference v4.1.0 Instruction Manual

Network OS Command Reference 697
53-1003115-01
show capture packet interface
2
show capture packet interface
Displays information about captured packets.
Synopsis show capture packet interface {all | fortygigabitethernet rbridge-id/slot/port | gigabitethernet
rbridge-id/slot/port | tengigabitethernet rbridge-id/slot/port}
Operands all Selects all interfaces.
fortygigabitethernet Selects a 40-GbE interface.
gigabitethernet Selects a 1-GbE interface.
tengigabitethernet Selects a 10-GbE interface.
rbridge-id/slot/port
Selects the RBridge ID, slot, and port of the respective interface.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information captured by means of the capture packet interface
command.
Usage Guidelines This command is supported in VCS and standalone mode. This command can be entered on any
RBridge in a Brocade VCS Fabric.
Examples
switch# show capture packet interface all
Packet Capture configured on the following interfaces
Te 130/0/5 >> ISL
Te 130/0/6 >> ISL
Te 130/0/21
Te 130/0/23
Te 130/0/24
Frame Received Time : Sat Mar 9 2013 0:57:0:282
Packet Type : ELD
Packet Direction : TX
Interface info : Te 130/0/21
ETHERNET HEADER
SrcMAC : 00:05:33:5e:01:67
DstMAC : 03:05:33:5d:f3:fa
Ethtype : 0x8100
Eth Frametype : 0x33
VlanID : 0xfff
ELD PAYLOAD DETAILS
---------------------------
Vlan id : 2
Src-Rbridgeid : 130
Src-Priority : 5
Magic Number : 5103
See Also capture packet interface