Reference v4.1.0 Instruction Manual

698 Network OS Command Reference

53-1003115-01

show cee maps

Displays information on the defined CEE maps.

Synopsis show cee maps default

Operands None

Defaults The only map name allowed is “default.”

Command Modes Privileged EXEC mode

Description Use this command to display information on the CEE map. The configuration state is displayed

with a list of all of the Layer 2 interfaces bound to the CEE map.

Usage Guidelines Network OS v4.1.0 only allows the CEE map named “default.”

Examples To view the CEE map:

switch0# show cee maps

CEE Map 'default'

Precedence: 1

Remap Fabric-Priority to Priority 0

Remap Lossless-Priority to Priority 0

Priority Group Table

1: Weight 40, PFC Enabled, BW% 40

2: Weight 40, PFC Disabled, BW% 40

3: Weight 20, PFC Disabled, BW% 20

15.0: PFC Disabled

15.1: PFC Disabled

15.2: PFC Disabled

15.3: PFC Disabled

15.4: PFC Disabled

15.5: PFC Disabled

15.6: PFC Disabled

15.7: PFC Disabled

Priority Table

CoS:01234567

----------------------------------------

PGID:223122215.0