Reference v4.1.0 Instruction Manual

Network OS Command Reference 723

53-1003115-01

show debug udld

Shows UDLD debug status on the switch.

Synopsis show debug udld

Operands None

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to show the unidirectional link detection (UDLD) protocol debug status of the

switch. The status reflects the bugging you set with the debug udld command.

Usage Guidelines None

Examples To display the debug status of the switch:

switch# show debug udld

Interface TenGigabitEthernet 5/0/3 : None

Interface TenGigabitEthernet 5/0/2 : Transmit and Receive

Interface TenGigabitEthernet 5/0/1 : Transmit