Reference v4.1.0 Instruction Manual

730 Network OS Command Reference

53-1003115-01

show diag burninerrshow

Displays the error messages that are stored in the nonvolatile storage on the slot during the POST

and system verification processes.

Synopsis show diag burninerrshow [rbridge-id rbridge-id]

Operands rbridge-id rbridge-id Specifies the RBridge ID of the switch for which errors stored in the storage

on the slot during POST and system verification are displayed.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display errors that are stored in nonvolatile storage on the slot during POST

and system verification.

Usage Guidelines None

Examples The error messages are updated when there is a POST failure or a systemVerification failure.

To display burn-in errors from the switch:

switch# show diag burninerrshow rbridge-id 1

errLog for slot M2

errLog is empty for slot M2

errLog for slot S1

errLog is empty for slot S1

errLog for slot S2

errLog is empty for slot S2

errLog for slot S3

errLog is empty for slot S3

errLog for slot L4

errLog is empty for slot L4

rbridgeId 1

See Also diag burninerrclear, diag clearerror, show diag burninstatus