Reference v4.1.0 Instruction Manual

Network OS Command Reference 733

53-1003115-01

show diag burninstatus

Displays the diagnostics burn-in status or system verification status stored in the nonvolatile

storage memory in the switch.

Synopsis show diag burninstatus [rbridge-id rbridge-id]

Operands rbridge-id rbridge-id Specifies the RBridge ID for the switch.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display the burn-in status for a switch.

Usage Guidelines None

Examples To display the diagnostics burn-in status:

switch# show diag burninstatus

DiagID State Status Run Cmd TotCmds PID Script SlotID

1 COMPLETE_TESTED PASS 1 8 8 23163 verify L1

2 COMPLETE_TESTED PASS 1 8 8 23311 verify L2

6 COMPLETE_TESTED PASS 1 5 5 23465 verify S2

7 COMPLETE_TESTED PASS 1 5 5 23618 verify S3

8 COMPLETE_TESTED PASS 1 5 5 23787 verify S4

9 COMPLETE_TESTED PASS 1 5 5 23976 verify S5

10 COMPLETE_TESTED PASS 1 5 5 24156 verify S6

12 COMPLETE_TESTED PASS 1 8 8 24388 verify L6

14 COMPLETE_TESTED PASS 1 8 8 24692 verify L8

rbridgeId 1

See Also diag burninerrclear, diag clearerror, show diag burninerrshow