Reference v4.1.0 Instruction Manual

736 Network OS Command Reference

53-1003115-01

show diag setcycle

Displays the current systemVerification test parameters.

Synopsis show diag setcycle [rbridge-id rbridge-id]

Operands rbridge-id rbridge-id Specifies the RBridge ID of the switch.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display current values used in system verification.

Usage Guidelines None

Examples To display current values used in system verification:

switch# show diag setcycle

CURRENT - KEYWORD : DEFAULT

1 - number_of_runs : 1

2 - min_lb_mode : 2

1 - tbr_passes : 1

16 - plb_nframes : 16

1 - pled_passes : 1

rbridgeId 1