Reference v4.1.0 Instruction Manual

Network OS Command Reference 741
53-1003115-01
show dot1x interface
2
show dot1x interface
Displays the state of a specified interface.
Synopsis show dot1x interface [tengigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port]
Operands tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the state of a specified interface.
Usage Guidelines The gigabitethernet rbridge-id/slot/port parameter is used only on Brocade VDX 6710,
Brocade VDX 8770-4, and Brocade VDX 8770-8 switches.
Examples To display the state of the 10-gigabit Ethernet interface 0/16:
switch# show dot1x interface tengigabitethernet 5/0/16
Dot1x Global Status: Enabled
802.1X info for interface te5/0/16
-----------------------------------
Port Control: Auto
Port Auth Status: Unauthorized
Protocol Version: 2
ReAuthentication: Disabled
Auth Fail Max Attempts: 0
ReAuth Max: 2
Tx Period: 30 seconds
Quiet Period: 60 seconds
Supplicant Timeout: 30 seconds
Server Timeout: 30 seconds
Re-Auth Interval: 3600 seconds
PAE State: Connected
BE State: Invalid
Supplicant Name: --
Supplicant Address: 0000.0000.0000
Current Id: 1
Id From Server: 0
See Also None