Reference v4.1.0 Instruction Manual

Network OS Command Reference 743

53-1003115-01

show dot1x statistics interface

Displays the statistics of a specified interface.

Synopsis show dot1x statistics interface [tengigabitethernet rbridge-id/slot/port |

gigabitethernet rbridge-id/slot/port]

Operands tengigabitethernet rbridge-id/slot/port

Specifies a valid 10-gigabit Ethernet interface.

rbridge-id Specifies the RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

gigabitethernet rbridge-id/slot/port

Specifies a valid 1-gigabit Ethernet interface.

rbridge-id Specifies the RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display the statistics of a specified interface.

Usage Guidelines The gigabitethernet rbridge-id/slot/port parameter is used only on Brocade VDX 6710,

Brocade VDX 8770-4, and Brocade VDX 8770-8 switches.

Examples To display the statistics for the 10-gigabit Ethernet interface 22/0/16:

switch# show dot1x statistics interface tengigabitethernet 22/0/16

802.1X statistics for interface te22/0/16

EAPOL Frames Rx: 0 - EAPOL Frames Tx: 0

EAPOL Start Frames Rx: 0 - EAPOL Logoff Frames Rx: 0

EAP Rsp/Id Frames Rx: 2 - EAP Response Frames Rx: 10

EAP Req/Id Frames Tx: 35 - EAP Request Frames Tx: 0

Invalid EAPOL Frames Rx: 0 - EAP Length Error Frames Rx: 0

EAPOL Last Frame Version Rx: 0 - EAPOL Last Frame Src: 0000.0000.0000