Reference v4.1.0 Instruction Manual

Network OS Command Reference 745

53-1003115-01

show edge-loop-detection detail

Displays ELD detailed information for the entire node.

Synopsis show edge-loop-detection detail [rbridge-id {rbridge-id | all}]

Operands rbridge-id rbridge-id Specifies the RBridge ID.

all Specifies all RBridge IDs in the VCS cluster.

Defaults None

Command Modes Privileged EXEC mode

ELD configuration mode

Description Use this command to view detailed ELD information for the entire node.

Usage Guidelines This functionality detects Layer 2 loops only.

If no rbridge-id rbridge-id is specified, ELD data on the particular node is displayed.

If rbridge-id rbridge-id is specified, ELD data for the node with that particular rbridge-id is

displayed.

If rbridge-id all is specified, ELD data from all the nodes in the cluster is displayed.

Examples

switch(conf-if-te-119/0/1)# do show edge-loop-detection detail

Number of edge-loop-detection instances enabled: 1

Data for Rbridge-id: 119

Total_instances: 1

Eld-mac: 03:05:33:65:1b:ec

Data for interface: te0/1

Eld-instance no. (enabled for VLANs): 1

Priority: 128 If_status: 1

Shutdown-vlan: 0 Vlag-master-id: 0 Age-left: 31913 mins

Port-type : 3 pvid_frame_type: 2 Brcd-agg-type: 0

Eld stats: Tx Rx

42 0

Enabled for Vlan-id: 10

Send-untagged: 0

time-rxlimit : 0

Vlan stats: Tx Rx

42 0

switch(conf-if-te-119/0/1)#

See Also edge-loop-detection vlan, hello-interval, pdu-rx-limit, protocol edge-loop-detection, shutdown-time