Reference v4.1.0 Instruction Manual

754 Network OS Command Reference
53-1003115-01
show environment sensor
2
show environment sensor
Displays the environment sensor status.
Synopsis show environment sensor [rbridge-id {rbridge-id | all}]
Operands rbridge-id Executes the command on the specified switches. Valid completions for
rbridge-id include the following:
rbridge-id Specifies the RBridge ID. This parameter is not valid in standalone mode,
and is supported only for the local RBridge ID.
all Specifies all switches in the fabric. This parameter is not supported.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the current temperature, fan, and power supply status readings from
sensors located on the switch. Refer to the show environment power command for an explanation
of the power supply status values.
Usage Guidelines This command is supported only on the local switch.
Examples To display the sensor readings on the switch:
switch# show environment sensor
sensor 1: (Temperature ) is Ok, value is 36 C
sensor 2: (Temperature ) is Ok, value is 40 C
sensor 3: (Temperature ) is Ok, value is 32 C
sensor 4: (Fan ) is Absent
sensor 5: (Fan ) is Ok,speed is 7345 RPM
sensor 6: (Power Supply) is Absent
sensor 7: (Power Supply) is Ok
See Also show environment fan, show environment history, show environment power,
show environment temp