Reference v4.1.0 Instruction Manual

Network OS Command Reference 757

53-1003115-01

show fabric ecmp load-balance

Displays the current configuration of hash field selection and hash swap.

Synopsis show fabric ecmp load-balance [rbridge-id value]

Operands rbridge-id value Specifies the RBridge ID

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display the current configuration of hash field selection and hash swap.

Usage Guidelines The show fabric family of commands display neighbor and local port information when connected

to a down-level RBridge.

This command displays ISL details, including the breakout index of the interface if breakout mode

is configured on the source or neighbor interface.

Examples Some typical outputs of this command:

switch# show fabric ecmp load-balance

Fabric Ecmp Load Balance Information

------------------------------------

Rbridge-Id : 2

Ecmp-Load-Balance Flavor : Destination MAC address and VID based load

balancing

Ecmp-Load-Balance HashSwap : 0x4