Reference v4.1.0 Instruction Manual

Network OS Command Reference 775
53-1003115-01
show fabric route neighbor-state
2
The show fabric family of commands display neighbor and local port information when connected
to a down-level RBridge.
When a fabric is running normal mode (switches are running Network OS 4.1.0 or later), CLI output
displays the QSFP breakout index for all switches in the fabric.
When a fabric is running mixed mode (switches are running Network OS 4.1.0 or earlier), the QSFP
breakout index is not displayed in the output on switches running Network OS versions earlier than
v4.1.0.This command displays ISL details, including the breakout index of the interface if breakout
mode is configured on the source or neighbor interface.
Examples To display the state of FSPF neighbors for the local switch:
switch# show fabric route neighbor-state
Rbridge-id: 66 #ISLs: 8
Src Src Nbr Nbr Nbr
Index Interface Index Interface State
-------------------------------------------------------
2 Te 66/0/2 2 Te 65/0/2 NB_ST_FULL
17 Te 66/0/17 41 Te 65/0/41 NB_ST_FULL
18 Te 66/0/18 42 Te 65/0/42 NB_ST_FULL
19 Te 66/0/19 43 Te 65/0/43 NB_ST_FULL
20 Te 66/0/20 44 Te 65/0/44 NB_ST_FULL
23 Te 66/0/23 47 Te 65/0/47 NB_ST_FULL
49 Fi 66/0/1 129 Fi 2/-/- NB_ST_FULL
53 Fi 66/0/5 129 Fi 160/-/- NB_ST_FULL
This example displays neighbor state route details and includes the breakout index of the interface
in normal mode.
sw0# show fabric route neighbor-state
Rbridge-id: 1 #ISLs: 1
Src Src Nbr Nbr Nbr
Index Interface Index Interface State
-------------------------------------------------------
30 Te 1/0/49:1 1 Te 48/0/49:1 NB_ST_FULL
This example displays neighbor state route details of the non-trunked port in mixed mode running
Network OS v4.0.0. (In mixed mode, the QSFP breakout index is not displayed in the output on a
switch running Network OS versions earlier than v4.1.0.)
sw0# show fabric route neighbor-state
Rbridge-id: 1 #ISLs: 2
Src Src Nbr Nbr Nbr
Index Interface Index Interface State
-------------------------------------------------------
30 Te 1/0/49 1 Te 48/0/49 NB_ST_FULL
This example displays neighbor state route details of the non-trunked port in mixed mode running
Network OS v4.1.0.
sw0# show fabric route neighbor-state
Rbridge-id: 1 #ISLs: 2