Reference v4.1.0 Instruction Manual

802 Network OS Command Reference

53-1003115-01

show firmwaredownloadstatus

Displays the firmware download activity log.

Synopsis show firmwaredownloadstatus [brief] [summary] [rbridge-id {rbridge-id | all}]

Operands brief Displays only the last entry of the firmware download event log.

summary Displays a high-level summary of the firmware download status.

rbridge-id Executes the command on the specified switch.

rbridge-id Specifies the RBridge ID for the switch.

all Specifies all switches in the VCS fabric.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display an event log that records the progress and status of events that

occur during a firmware download. The event log is created by the current firmware download

command and is retained until you issue another firmware download command. A time stamp is

associated with each event.

Usage Guidelines The rbridge-id operand is supported in VCS mode only.

The output varies depending on the hardware platform.

Examples To display the firmware download event log on a Brocade VDX 8770-4:

switch# show firmwaredownloadstatus

[1]: Tue Mar 6 04:05:20 2012

Slot M1: Firmware install begins.

[2]: Tue Mar 6 04:09:02 2012

Slot M1: Firmware install ends.

[3]: Tue Mar 6 04:09:02 2012

Slot M2: Firmware install begins.

[4]: Tue Mar 6 04:12:08 2012

Slot M2: Firmware install ends.

[5]: Tue Mar 6 04:12:09 2012

Slot M1: Firmware starts to swap.

[6]: Tue Mar 6 04:12:09 2012

Slot M2: Firmware starts to swap.

(output truncated)

To display a condensed version of the firmware download status:

switch# show firmwaredownloadstatus brief

[35]: Tue Mar 6 04:23:10 2012

Slot M1: Firmware is downloaded successfully.