Reference v4.1.0 Instruction Manual

Network OS Command Reference 815
53-1003115-01
show interface FibreChannel
2
The second column displays link error status block counters.
Link_failure Link failures
Loss_of_sync Synchronization losses
Loss_of_sig Signal losses
Protocol_err Protocol errors
Invalid_word Invalid words
Invalid_crc Cyclic redundancy errors
Delim_err Delimiter errors
Address_err Addressing errors
Lr_in Line resets in
Li_out Line resets out
Ols_in Offline primitive sequences in
Ols_out Offline primitive sequences out
The third column shows the number of transmitted frames rejected and busied:
Frjt Transmitted frames rejected.
Fbsy Transmitted frames busied.
after this, some transmission rate Information is displayed:
Bandwidth Bandwidth of the port.
Tx performance Bytes per second transmitted.
Rx performance Bytes per second received
When used with the detail parameter, this command also reports the following receive statistics,
transmit statistics, error statistics, and port error information.
Receive statistics:
stat_wrx 4-byte words received.
stat_frx Frames received.
stat_c2_frx Class 2 frames received.
stat_c3_frx Class 3 frames received.
stat_lc_rx Link control frames received.
stat_mc_rx Multicast frames received.
Transmit statistics:
stat_wtx 4-byte words transmitted.
stat_ftx Frames transmitted.
stat_mc_tx Multicast frames transmitted.