Reference v4.1.0 Instruction Manual

Network OS Command Reference 829

53-1003115-01

show ip bgp attribute-entries

Displays BGP4 route-attribute entries that are stored in device memory.

Synopsis show ip bgp attribute-entries [rbridge-id rbridge-id]

Operands rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on

individual nodes.

rbridge-id Specifies a unique identifier for a node.

Defaults None

Command Modes Privileged EXEC mode

Description The route-attribute entries table lists the sets of BGP4 attributes that are stored in device memory.

Each set of attributes is unique and can be associated with one or more routes. In fact, the device

typically has fewer attribute entries than routes. Use this command to view BGP4 route-attribute

entries that are stored in device memory.

Usage Guidelines None

Examples

switch# show ip bgp attribute-entries