Reference v4.1.0 Instruction Manual

Network OS Command Reference 831

53-1003115-01

show ip bgp filtered-routes

Displays BGP4 filtered routes that are received from a neighbor or peer group.

Synopsis show ip bgp filtered-routes {detail} [ip-addr {/mask} [longer-prefixes]] | as-path-access-list name]|

prefix-list name] [rbridge-id rbridge-id]

Operands detail Optionally displays detailed route information.

ip-addr IPv4 address of the destination network in dotted-decimal notation.

mask (Optional) IPv4 mask of the destination network in CIDR notation.

longer-prefixes Specifies all statistics for routes that match the specified route, or that

have a longer prefix than the specified route.

as-path-access-list Specifies an AS-path ACL.

prefix-list Specifies an IP prefix list.

name Name of an AS-path ACL or prefix list.

rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on

individual nodes.

rbridge-id Specifies a unique identifier for a node.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to view BGP4 filtered routes that are received from a neighbor or peer group.

Usage Guidelines None

Examples

switch# show ip bgp filtered-routes detail 10.11.12.13 prefix-list