Reference v4.1.0 Instruction Manual

834 Network OS Command Reference

53-1003115-01

show ip bgp neighbors

Displays configuration information and statistics for BGP4 neighbors of the device.

Synopsis show ip bgp neighbors {ip-addr | route-summary | last-packet-with-error} [rbridge-id rbridge-id]

Operands ip-addr IPv4 address of a neighbor in dotted-decimal notation.

route-summary Displays routes received, routes accepted, number of routes advertised by

peer, and so on.

last-packet-with-error Displays the last packet with an error.

rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on

individual nodes.

rbridge-id Specifies a unique identifier for a node.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to view configuration information and statistics for BGP4 neighbors of the

device. Output shows all configured parameters for the neighbors. Only the parameters whose

values differ from defaults are shown.

Usage Guidelines None

Examples

switch# show ip bgp neighbors route-summary