Reference v4.1.0 Instruction Manual

838 Network OS Command Reference
53-1003115-01
show ip bgp neighbors received-routes
2
show ip bgp neighbors received-routes
Lists all route information received in route updates from BGP4 neighbors of the device since the
soft-reconfiguration feature was enabled.
Synopsis show ip bgp neighbors ip-addr received-routes {detail} [rbridge-id rbridge-id]
Operands ip-addr IPv4 address of a neighbor in dotted-decimal notation.
detail Displays detailed route information.
rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id Specifies a unique identifier for a node.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to view all route information received in route updates from BGP4 neighbors of
the device since the soft-reconfiguration feature was enabled.
Usage Guidelines None
Examples
switch# show ip bgp neighbors 10.11.12.13 received-routes
See Also None