Reference v4.1.0 Instruction Manual

Network OS Command Reference 841

53-1003115-01

show ip bgp peer-group

Displays peer-group information.

Synopsis show ip bgp peer-group peer-group-name [rbridge-id rbridge-id]

Operands ip-addr IPv4 address of a neighbor in dotted-decimal notation.

peer-group-name Peer-group name configured by the neighbor peer-group-name command.

rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on

individual nodes.

rbridge-id Specifies a unique identifier for a node.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to view peer-group information. Only the parameters that differ from defaults

are listed.

Usage Guidelines None

Examples

switch# show ip bgp peer-group mypeergroup