Reference v4.1.0 Instruction Manual

842 Network OS Command Reference
53-1003115-01
show ip bgp routes
2
show ip bgp routes
Displays BGP4 route information that is filtered by the table entry at which the display starts.
Synopsis show ip bgp routes num [rbridge-id rbridge-id]
Operands num Table entry at which the display starts.
rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id Specifies a unique identifier for a node.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to view BGP4 route information that begins with a table entry defined by num.
Usage Guidelines None
Examples
switch# show ip bgp routes 100
See Also None