Reference v4.1.0 Instruction Manual

844 Network OS Command Reference

53-1003115-01

show ip bgp routes as-path-access-list

Displays BGP4 route information that is filtered by autonomous system (AS)-path access control

list (ACL).

Synopsis show ip bgp routes [as-path-access-list name] [rbridge-id rbridge-id]

Operands as-path-access-list Displays only those routes that use the AS-path ACL defined by name.

name Name of AS-path ACL.

rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on

individual nodes.

rbridge-id Specifies a unique identifier for a node.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to view BGP4 route information that is filtered by AS-path ACL.

Usage Guidelines None

Examples To view BGP4 routes filtered by AS-path ACL:

switch# show ip bgp routes as-path-access-list myacl